BLOG
Focus on hot topics, real-time dynamics
Several precautions for IQF fish quick freezing equipment
Q: Should we choose spiral or fluidized flow for IQF of black croaker?
Answer: Look at the product form. For whole fish, fish sections, fish fillets, and coated fish fillets that are "large, flaky, and cannot be suspended", the spiral freezer is preferred. It has a long freezing path, relatively compact footprint, and is suitable for continuous production.
Small sized monomers such as black fish cubes, fish chunks, fish balls, and small fish strips are suitable for fluidized IQF, which relies on cold air to lift the material and achieve particle separation.
If the black croaker is whole or large, but it becomes hard and fluidized, it is easy to not float, stick, or break; If it is a small piece but uses ordinary slow freezing, it will freeze into a lump again.
Q: How to set the freezing temperature and time?
Answer: The core is to quickly pass through the maximum ice crystal formation zone of -1 ℃ to -5 ℃ for the black fish, reducing cell rupture.
The temperature of the quick freezing chamber is generally set at -30 ℃ to -40 ℃;
The center temperature of the black croaker should drop below -18 ℃ within 30 minutes, and for high value-added products, it can be shortened to within 15 minutes;
It is best to pre cool the center temperature of the black croaker to 0 ℃ to 4 ℃ before freezing. Do not enter the machine at room temperature, otherwise the temperature fluctuation in the storage will be large and the freezing rate will decrease.
Q: What is the easiest pit to step on before entering the freezer?
Answer: Two: not drained and not pre cooled.
After cleaning, dividing, marinating, or hanging the paste, the surface free water of the black fish must be removed by vibration draining, centrifugal dehydration, or short-term draining. When water is brought into the machine, the surface water freezes first, which is prone to adhesion, excessive icing, and large weight deviation.
If making seasoning fish slices, the surface of the sauce should also be slightly dried before freezing to avoid adhesion and detachment.
Q: Do you want the black fish to be coated with ice?
Answer: When making IQF individual black fish chunks, fish cubes, and fish segments, it is usually recommended to coat them with ice to isolate oxygen, reduce dry consumption, and prevent freezing burns.
Generally, clean ice water at 0 ℃ to 4 ℃ is used for short-term dipping, and the proportion of ice clothing is usually controlled at 3% to 10%, depending on customer orders, export standards, and label compliance requirements.
Be careful not to make the ice jacket too thick, otherwise the available net meat quantity will decrease after thawing, and customers may suffer losses when calculating the actual unit price.
Q: How to determine if IQF black fish is frozen well?
Answer: Look at four points:
Scattered: grab a handful that does not stick or clump together;
Color: No white frost spots or severe frostbite on the surface;
Temperature: Center temperature ≤ -18 ℃;
Low thawing weight loss: compliant IQF aquatic products should have significantly lower effluent after thawing than ordinary slow freezing, and high-quality processes can control thawing weight loss at a lower level. nineteen
Q: What parameters should be considered the most when selecting equipment?
Answer: Don't just look at "how many kilograms per hour", look at it together:
Feed temperature, discharge center temperature;
Is the freezing time adjustable;
Evaporation temperature, temperature inside the warehouse;
Does the cooling capacity match the production volume;
Mesh belt width, number of layers, effective freezing area;
Can the wind speed be adjusted in different zones;
Whether it supports CIP or is easy to disassemble and wash;
Refrigerant type and energy consumption.
The fat content of black croaker varies greatly depending on the variety and season, and high-fat products are more prone to oxidation in the later stage, so the packaging and freezing temperature should also be calculated together.
Hot Tags:
PREVIOUS:
Contact Us
E-mail:
sales@syguanfeng.com
Tel:
+86 15088506234
Address:
South Industrial Park of Dongguan, Shangyu District, Shaoxing City,Zhejiang Province,China.
GUANFENG, your customization experts!
GUANFENG FOOD MACHINERY - leading supplier of integrated food processing solutions
Copyright© 2024 ZHEJIANG GUANFENG FOOD MACHINERY CO.,LTD.
