BLOG
Focus on hot topics, real-time dynamics
Operation of Orange Drying Belt Machine
Q1: How to lay orange slices on a mesh belt to ensure even drying?
A: Orange slices must be evenly and horizontally laid in a single layer on the conveyor belt, and stacking or overcrowding is strictly prohibited. According to the operating specifications of the belt dryer, the thickness of the material on the mesh belt should be strictly controlled between 15-25mm. If it is laid too thick or stacked unevenly, it will cause the hot air to not penetrate smoothly, resulting in the bottom layer of oranges not being fully dried and the top layer being burnt. At the same time, the feeding amount should be reasonably controlled according to the running speed of the mesh belt to avoid material interruption or material accumulation at the discharge end.
Q2: How should the temperature and belt speed be set and adjusted during the drying process?
A: Oranges are rich in sugar and sensitive to temperature, so they need to be dried at a gentle temperature (usually controlled between 50 ℃ -60 ℃). It is strictly prohibited to set extremely high temperatures directly to avoid sugar coking and bitterness. The adjustment of mesh belt speed needs to be coordinated with temperature: too fast speed will cause oranges to not be fully dehydrated, while too slow speed will increase energy consumption and even burn. During operation, operators need to closely monitor the temperature, humidity, and speed parameters on the control panel. If uneven drying of oranges is found, the mesh belt speed or heating power should be adjusted in a timely manner.
Q3: After drying, can we immediately stop the machine and start packaging?
A: Absolutely not. When stopping the machine, it is necessary to follow the standard procedure: first stop feeding, and after all the orange slices on the conveyor belt are conveyed, turn off the heating system first. However, the fan and conveyor belt must continue to run for 10-15 minutes to dissipate the waste heat inside the equipment and prevent the oranges from deteriorating due to high temperature being trapped in the machine. After discharging, dried oranges cannot be immediately packaged. They need to be cooled at room temperature to near ambient temperature (about 30 ℃), and then sealed and packaged after they have completely cooled and become brittle to prevent hot air from condensing in the packaging bag and causing moisture and mold.
PREVIOUS:
Contact Us
E-mail:
sales@syguanfeng.com
Tel:
+86 15088506234
Address:
South Industrial Park of Dongguan, Shangyu District, Shaoxing City,Zhejiang Province,China.
GUANFENG, your customization experts!
GUANFENG FOOD MACHINERY - leading supplier of integrated food processing solutions
Copyright© 2024 ZHEJIANG GUANFENG FOOD MACHINERY CO.,LTD.
