GUANFENG FOOD MACHINERY

main products include freeze-drying, drying, quick freezing, deep frying, pre-treatment, liquid nitrogen freezing, sterilization, cold chain storage and other food machinery equipment

Pet feed freeze-drying

Product Category:

If it is raw cut freeze-dried snacks, such as diced chicken breast, beef strips, salmon chunks, the production line can be simplified as follows:
Cleaning and cutting → draining → plating → pre freezing → freeze-drying → sorting → gold inspection → nitrogen filling/vacuum packaging
If it is freeze-dried raw bone and meat, composite freeze-dried grain, or freeze-dried granules, it is necessary to add:
Crushing/grinding meat → ingredient mixing → homogenization → extrusion molding → quick freezing → freeze-drying → sorting → spraying/mixing → packaging
If producing high-end export products, it is recommended to prioritize the use of 316L stainless steel for the material contact part, and to provide CIP cleaning, low humidity packaging room, and online moisture content detection.

If it is raw cut freeze-dried snacks, such as diced chicken breast, beef strips, salmon chunks, the production line can be simplified as follows:
Cleaning and cutting → draining → plating → pre freezing → freeze-drying → sorting → gold inspection → nitrogen filling/vacuum packaging
If it is freeze-dried raw bone and meat, composite freeze-dried grain, or freeze-dried granules, it is necessary to add:
Crushing/grinding meat → ingredient mixing → homogenization → extrusion molding → quick freezing → freeze-drying → sorting → spraying/mixing → packaging
If producing high-end export products, it is recommended to prioritize the use of 316L stainless steel for the material contact part, and to provide CIP cleaning, low humidity packaging room, and online moisture content detection.

  • Product Detail
  • Product advantages
  • 产品概要表格
    • Commodity name: Pet feed freeze-drying

    If it is raw cut freeze-dried snacks, such as diced chicken breast, beef strips, salmon chunks, the production line can be simplified as follows: Cleaning and cutting → draining → plating → pre freezing → freeze-drying → sorting → gold inspection → nitrogen filling/vacuum packaging If it is freeze-dried raw bone and meat, composite freeze-dried grain, or freeze-dried granules, it is necessary to add: Crushing/grinding meat → ingredient mixing → homogenization → extrusion molding → quick freezing → freeze-drying → sorting → spraying/mixing → packaging If producing high-end export products, it is recommended to prioritize the use of 316L stainless steel for the material contact part, and to provide CIP cleaning, low humidity packaging room, and online moisture content detection.

    Overview of freeze-drying pet feed:
    The core process of pet feed freeze-drying production line is: raw material acceptance and pretreatment → ingredients/molding → quick freezing and pre freezing → vacuum sublimation drying → analytical drying → cooling and sorting → metal detection → packaging sterilization → warehousing. Compared with freeze-drying of fruits and vegetables, freeze-drying of pet feed emphasizes more on controlling the eutectic point of meat, fat management, rehydration, microbial control, and packaging oxygen barrier.
    Pet feed freeze-drying process:

    productcate-221-55

    GFD-5

    GFD-10

    GFD-25

    GFD-50

    GFD-100

    GFD-125

     

    Drying Area(㎡)

    5

    10

    25

    50

    100

    125

     

    Average Dehydration(kg/h)

    5

    10

    25

    50

    100

    125

     

    Number of Tray(pcs)

    12

    24

    72

    144

    288

    360

     

    Size of Tray

    780*540*30

    540*645*30

    Size of tank(m)

    1.0*3.4

    1.5*3.2

    1.88*4.2

    2.0*8.16

    2.4*10.2

    2.4*12

     

    Operation Vacuum(Pa)

    13.3~133Pa

    Heating plate Temp.(℃)

    Normal temperature ~ +120℃

    Electric Heating(kw)

    12

    21

    50

    /

    /

    /

     

    Steam Consumption(kg/h)

    /

    /

    /

    150

    300

    360

     

    Cold Load Consumption(kw)

    12

    22

    45

    90

    180

    225

     

    Installation Power(kw)

    22

    53

    112

    115

    213

    251

     


    Raw material pretreatment cleaning machine, meat slicer, grinder, homogenizer, drain machine, meat fascia removal, and blood removal; Diced/sliced/minced meat should have uniform specifications; Try to drain the surface free water as much as possible to avoid adhesion and uneven freeze-drying
    Ingredient molding mixers, extruders, molding machines, and molds can be directly placed on a plate for raw meat cutting; Raw meat and meat/meat puree grains need to be mixed and extruded, cut into sections or pressed into blocks; The composite formula needs to control the uniformity of mixing
    Quick freezing and pre freezing warehouses, tunnel freezers, and liquid nitrogen freezers typically freeze rapidly at -30 ° C to -45 ° C to form small ice crystals of water; Meat should be frozen until it reaches below the eutectic point to prevent collapse during sublimation
    Sublimation drying vacuum freeze dryer, cold trap, vacuum system vacuum degree is generally controlled at 10-30Pa; slow heating to avoid surface crust; Remove most of the free water at this stage
    The shelf temperature of the vacuum freeze dryer can be raised to 30-45 ℃ to further remove bound water; The moisture content of finished products is usually controlled at ≤ 5%, and high demand products can achieve ≤ 3%
    Cool and sort the low humidity cooling room, vibrating screen, and sorting table as soon as possible after they leave the warehouse to avoid moisture regain; Remove fragments, deformed products, and products with abnormal color
    Metal detection machine prevents metal foreign objects generated by tool and equipment wear from entering the finished product
    Packaging sterilization nitrogen filling/vacuum packaging machine, aluminum foil bag, irradiation or HPP high barrier packaging moisture-proof and oxygen proof; Export or high bacterial control products can be combined with irradiation/HPP, but the impact on nutrition and flavor needs to be verified
    Freeze drying curve of pet feed:


    The freeze-drying of pet feed should not only be based on the duration of freezing and drying, but should be controlled in three stages: pre freezing, sublimation, and analysis
    Pre freezing stage
    The eutectic point of meat is usually around -15 ℃ to -25 ℃, and the recommended final temperature for pre freezing is lower than the eutectic point. It is commonly used to be between -30 ℃ and -45 ℃, and kept warm until the material is completely frozen hard.
    Sublimation drying stage
    Vacuumize to 10-30Pa, slowly raise the temperature of the shelf, and keep the material temperature below the collapse temperature at all times. The freeze-drying cycle of meat is usually longer than that of fruits and vegetables, usually lasting 18-24 hours per batch, depending on the loading thickness, meat block size, and moisture content.
    Analyze the drying stage
    The vacuum degree can be further reduced, and the shelf temperature can be raised to 30-45 ℃ to remove residual bound water to the target value. The lower the final moisture content, the better the shelf life and crispness, but the energy consumption will also increase

  • If it is raw cut freeze-dried snacks, such as diced chicken breast, beef strips, salmon chunks, the production line can be simplified as follows:
    Cleaning and cutting → draining → plating → pre freezing → freeze-drying → sorting → gold inspection → nitrogen filling/vacuum packaging
    If it is freeze-dried raw bone and meat, composite freeze-dried grain, or freeze-dried granules, it is necessary to add:
    Crushing/grinding meat → ingredient mixing → homogenization → extrusion molding → quick freezing → freeze-drying → sorting → spraying/mixing → packaging
    If producing high-end export products, it is recommended to prioritize the use of 316L stainless steel for the material contact part, and to provide CIP cleaning, low humidity packaging room, and online moisture content detection.

GUANFENG FOOD MACHINERY

Product

Applications

GUANFENG FOOD MACHINERY

Product

Recommendation

Vacuum freeze drying of jackfruit

The finished product is stuck together and the latex is not completely removed, resulting in increased delamination and rinsing. The process may cause browning, darkening, lack of color protection, or insufficient color protection due to immersion in citric acid and ascorbic acid, enzyme collapse, insufficient freezing of surface crust, or rapid heating. The eutectic point should be measured, and the heating slope should be controlled. The center wet core should be cut too thick or the material layer should be reduced to 10-15 mm. The material layer should be ≤ 20 mm. After rehydration, the taste will be soft and slow, and the cell structure will be damaged. The shelf life should be frozen below -35 ℃. The moisture content should be high, and the residual oxygen and moisture should be reduced to below 4%. Nitrogen replacement should be

Vacuum Freeze Drying Equipment

Pre processing determines the upper limit of finished product quality. This includes cleaning, trimming, cutting, blanching (enzyme inactivation and color protection), and concentration (increasing solid content and reducing subsequent sublimation water volume - this is the most economical energy-saving method). Plate/fabric single-layer uniform, non overlapping, thickness determined according to material characteristics (generally 10-20 mm). The uniformity of plating directly determines batch consistency; The tray is recommended to be made of 316L or food grade aluminum alloy with guide holes.

Vacuum freeze drying of tremella soup

The essence of vacuum freeze drying of Broth of white fungus is to first boil it into soup, then freeze it at low temperature, and finally vacuum sublimation dehydration. It is more difficult to make than tremella pieces, because Broth of white fungus contains polysaccharide, gum and sugar, high viscosity, many solids, easy to collapse, stick to the plate, and slow rehydration. In terms of craftsmanship, it is necessary to control the "boiling concentration, plating thickness, pre freezing permeability, sublimation rate, and analytical endpoint" in a series.

Vacuum freeze drying of tremella soup

Discharge, post-treatment and packaging discharge environment: freeze-dried Broth of white fungus soup is highly hygroscopic, and discharge should be carried out in a clean environment with low humidity. Crushing whole granules: If making Tremella powder or brewing granules, it needs to be crushed, sieved, and mixed; If making a whole piece of soup, demold and sort it. Packaging method: Priority should be given to using aluminum foil composite bags, high barrier bags, and vacuum or nitrogen filled sealing. Storage conditions: Store at room temperature, away from light, and dry to avoid moisture absorption and clumping caused by repeated heating and cooling.

Get

A Quote

Please leave your email address, our professionals will contact you as soon as possible!

Product name:
Submit
%E7%AC%AC%E4%B8%80%EF%BC%8C%E6%9C%80%EF%BC%8C%E4%BC%98%E7%A7%80%EF%BC%8C%E5%A2%9E%E5%BC%BA%EF%BC%8C%E4%B8%80%E6%B5%81

Sorry,当前栏目暂无内容!

您可以查看其他栏目或返回 首页

Sorry,The current column has no content!

You can view other columns or return Home

Get

A Quote

Leave us a message and get access to exclusive offers, product updates, and expert advice tailored just for you!

*is requiredl You can ask any questions in the company including products.Please ill in the correct contact infomation so that we can reply to youin time!

Submit
%{tishi_zhanwei}%