BLOG

Focus on hot topics, real-time dynamics

Back to Overview

Three precautions for mint heat pump dryer process

2026-09-16

1、 Strictly control temperature in sections and prohibit exceeding 55 ℃ throughout the entire process
Peppermint is rich in thermosensitive volatile oils (menthol, menthone, etc.), and once the temperature gets out of control, the aroma and efficacy are directly destroyed. Three stage gradient temperature control must be adopted:
Initial moisture removal and color setting: 38 ℃~45 ℃, lasting for 6-8 hours, slowly removing surface free water to prevent the skin from drying out too quickly and locking in internal moisture.
Mid stage constant temperature dehydration: 48 ℃~52 ℃, strictly prohibited from exceeding 55 ℃. High temperature will damage chlorophyll and volatile oil, causing leaves to turn green and yellow, and a large amount of menthol to be lost.
Late stage low-temperature slow drying: fall back to 40 ℃~42 ℃, last for 3~5 hours, slowly balance residual moisture, avoid sudden temperature and rapid drying causing burnt edges and brown edges.
Operation points: Before starting up, it is necessary to calibrate the temperature control sensor (the error should be controlled within ± 1 ℃), closely monitor the temperature curve during operation, and adjust it immediately if overheating is found.
2、 Thin layer without stacking, choose wire mesh for baking tray
Mint leaves are delicate and have high moisture content, and the loading method directly determines the drying uniformity and finished product appearance
Single layer thin paving, strictly prohibited from overlapping: Stacking blades can cause lack of ventilation in the middle, accumulation of moisture and heat, and local high temperatures can turn black brown. It is recommended that the thickness of the paving material should not exceed 2-5cm.
The baking tray must be made of wire mesh: do not use perforated trays, as perforated trays have poor ventilation and the bottom blades are prone to rotting and discoloration. Stainless steel mesh disk is breathable and does not accumulate water or steam, with the best effect.
After cleaning, thoroughly drain and dry before baking: When cleaning mint, only spray quickly and do not soak it (cell water absorption and rupture can cause essential oil loss and browning). After cleaning, the surface water must be fully drained, and adding raw water to the baking tray will cause it to rot and discolor.
Operation points: Dry within 4 hours after harvesting and do not store overnight at room temperature; During the drying process, turn it over appropriately every 2 hours to ensure consistency in dryness and wetness between the upper and lower layers.
3、 After being baked, it must be cooled and sealed to prevent secondary discoloration and moisture regain
After reaching the drying standard (with a moisture content of 8% to 12% and leaves that can be easily crushed by pinching), it is strictly prohibited to pack them directly while they are still hot
Natural cooling in a cool place for 1-2 hours: When directly sealed at high temperatures, water vapor will condense inside the bag, causing the finished product to regain moisture, change color, mold, and deteriorate.
Sealed and stored in the dark: The volatile oil in dried mint will accelerate oxidation when exposed to light, and the aroma will dissipate within a few weeks of open storage. Aluminum foil bags or dark sealed bags should be used and stored in a cool, dry, and dark place.
Regularly check inventory: observe whether the packaging is swollen, whether the materials have changed color or the aroma has faded, and deal with any abnormalities immediately.

 

Contact Us

 

E-mail:

sales@syguanfeng.com

Tel: 
+86 15088506234

 

Address: 

South Industrial Park of Dongguan, Shangyu District, Shaoxing City,Zhejiang Province,China.

 

%E7%AC%AC%E4%B8%80%EF%BC%8C%E6%9C%80%EF%BC%8C%E4%BC%98%E7%A7%80%EF%BC%8C%E5%A2%9E%E5%BC%BA%EF%BC%8C%E4%B8%80%E6%B5%81

Sorry,当前栏目暂无内容!

您可以查看其他栏目或返回 首页

Sorry,The current column has no content!

You can view other columns or return Home

Get

A Quote

Leave us a message and get access to exclusive offers, product updates, and expert advice tailored just for you!

*is requiredl You can ask any questions in the company including products.Please ill in the correct contact infomation so that we can reply to youin time!

Submit
%{tishi_zhanwei}%