BLOG

Focus on hot topics, real-time dynamics

Back to Overview

Rice vacuum freeze-drying

2026-09-18

Accurate control of cooking dispersion and gelatinization degree
The initial state of rice directly determines the success or failure of freeze-drying and the quality of rehydration:
Cooking gelatinization: the rice water ratio is suggested to be 1:1.2~1.5, boiled to medium soft hardness (avoid too soft or sandwiched), to ensure that the starch is fully gelatinized to form a uniform gel network, excessive gelatinization will reduce the frost resistance, and insufficient gelatinization will lead to sandwiched taste after rehydration.
Discrete processing: When cooking cooked rice, a discrete solution (water, ethanol, and non-ionic emulsifiers, with a dosage of 2% -8%) should be added and dispersed at ≤ 50 ℃ to prevent rice grains from sticking and clumping, ensuring uniform heating and smooth sublimation channels during freeze-drying.
Safe time limit: Cooling and plating should be completed within 2 hours after cooking. Prolonged storage at room temperature can easily breed Bacillus cereus, and starch retrogradation can significantly affect the quality of freeze-drying.
2. Matching pre freezing rate with loading thickness
Insufficient pre freezing or excessive material loading are the main causes of freeze-drying collapse and difficulty in rehydration:
Pre freezing temperature: The eutectic point of rice is about -17 ℃, and the final pre freezing temperature should be 5-10 ℃ lower than the eutectic point, that is, -25 ℃ to -45 ℃, to ensure that the internal moisture is completely converted into solid ice crystals.
Pre freezing time: Following the principle of "1mL sample ≈ 2-3h", it usually takes 3-5 hours to ensure that the temperature inside and outside the rice is uniform and completely frozen.
Material thickness: It is recommended to control it at around 1.5cm, and it should be loosely laid flat with reserved gaps. It is strictly prohibited to compact or stack it too thick, otherwise it will hinder heat conduction and ice crystal sublimation channels, making it difficult for the center to dry completely.
Freezing rate: quick freezing (>5 ℃/min) forms fine ice crystals, which has little damage to the starch gel network, and the taste after rehydration is closer to that of fresh rice; Although slow freezing sublimates quickly, the ice crystals are large and the structure is heavily damaged.
3. Temperature and vacuum control during sublimation stage to prevent collapse
The parameter control of the main drying and analytical drying stages is the key to ensuring that the finished product is porous, crispy, and quickly rehydrated
Vacuum degree: Maintain below 10Pa throughout the entire process (maximum vacuum can reach 2.7Pa), ensuring a decrease in the boiling point of water and direct sublimation of ice crystals at low temperatures.
One drying (sublimation): The shelf temperature should be controlled between -40 ℃ and+20 ℃ (gradient slow heating), and the material temperature must be below the melting point (around -7 ℃) to prevent melting and collapse; It takes about 8 hours.
Secondary drying (analysis): Raise the shelf temperature to 20 ℃~60 ℃, remove residual bound water, and reduce the final moisture content to 3%~5%; It takes about 10 hours.
Cold trap temperature: It should be at least 20 ℃ lower than the material temperature, usually kept below -65 ℃, to ensure efficient condensation and capture of water vapor and avoid reflux pollution of the vacuum pump.

 

Contact Us

 

E-mail:

sales@syguanfeng.com

Tel: 
+86 15088506234

 

Address: 

South Industrial Park of Dongguan, Shangyu District, Shaoxing City,Zhejiang Province,China.

 

%E7%AC%AC%E4%B8%80%EF%BC%8C%E6%9C%80%EF%BC%8C%E4%BC%98%E7%A7%80%EF%BC%8C%E5%A2%9E%E5%BC%BA%EF%BC%8C%E4%B8%80%E6%B5%81

Sorry,当前栏目暂无内容!

您可以查看其他栏目或返回 首页

Sorry,The current column has no content!

You can view other columns or return Home

Get

A Quote

Leave us a message and get access to exclusive offers, product updates, and expert advice tailored just for you!

*is requiredl You can ask any questions in the company including products.Please ill in the correct contact infomation so that we can reply to youin time!

Submit
%{tishi_zhanwei}%