BLOG

Focus on hot topics, real-time dynamics

Back to Overview

Precautions for vacuum packaging of freeze-dried apples

2026-10-30

1. Control the moisture content first, then talk about vacuum packaging
The moisture content of freeze-dried apple slices before packaging must meet the standard, otherwise they will still soften, regain moisture, and even accelerate browning after vacuum packaging.
It is generally recommended to control it within ≤ 5%, and high-quality crisps can be controlled within 3% -5%; According to the requirements of GH/T 1326-2021 "Freeze dried Fruits and Vegetables", the moisture content of freeze-dried fruits should be ≤ 8%, but it is recommended to be stricter for making crispy products.
Operation points:
Confirm that the material temperature has decreased before leaving the warehouse to avoid condensation caused by hot material bagging.
Screen, weigh, and package as soon as possible after leaving the warehouse to reduce exposure time to air.
It is recommended to control the relative humidity in the packaging room below 30%, and if conditions permit, achieve RH<20%.
If the film body is found to be soft, sticky, and the sound is muffled, it should be returned to the warehouse for re drying or extended for analytical drying, and not directly packaged.
2. High barrier packaging materials should be selected, and it is not recommended to use ordinary vacuum bags
Freeze dried apple slices are sensitive to both water vapor and oxygen, and ordinary PE bags and vacuum bags have insufficient barrier properties. After being stored for a period of time, they are prone to softening and discoloration.
Recommended materials:
Aluminum foil composite bag: It has the best moisture-proof, oxygen blocking, and light blocking effects, and is suitable for long-term storage, e-commerce, and export products.
Aluminum plated composite bag: lower cost than aluminum foil bag, but slightly weaker barrier properties, suitable for short warranty or fast turnover products.
It is recommended to control the water vapor transmission rate of packaging at a relatively low level, and the industry commonly uses ≤ 0.5g/(m ² · 24h) as a reference.
Attention should be paid when sealing:
The sealing area must be clean, dry, and free of powder and sugar residue.
The sealing width, temperature, and pressure should be stable to avoid virtual or wrinkled sealing.
After sealing, sampling and leak detection can be carried out to prevent gas leakage and moisture regain in the later stage.
3. Crispy chips are more suitable for "vacuum nitrogen filling" and excessive vacuuming is not recommended
Apple freeze-dried slices are very brittle. If only subjected to high vacuum bagging, the bag will adhere tightly to the material, making it easy to crush during transportation and potentially causing the edges of the slices to shatter and lose powder. For such fragile fruit and vegetable chips, vacuum nitrogen packaging is usually more suitable than pure vacuum packaging.
Operation points:
Nitrogen purity is recommended to be ≥ 99%, using food grade nitrogen.
First, evacuate and replace the air inside the bag, then fill it with nitrogen, and finally heat seal it.
Maintaining a slight positive pressure inside the bag can reduce compression and breakage, as well as lower oxygen content, delaying browning and flavor deterioration.
If making products with a long shelf life, food grade desiccants or deoxidizers can be added, but it is necessary to confirm that they do not come into direct contact with the product and comply with target market regulations.
Storage and inspection after packaging
Finished products should be stored in a cool, dry, and dark environment, avoiding high temperatures and humidity.
If shipped to humid and hot regions such as Southeast Asia and the Middle East, or shipped by sea for a long period of time, the packaging barrier and nitrogen filling control must be stricter.
Before shipment, it is recommended to conduct random inspections on moisture content, sealing strength, air leakage rate, residual oxygen content, appearance brittleness, and rehydration properties.

Contact Us

 

E-mail:

sales@syguanfeng.com

Tel: 
+86 15088506234

 

Address: 

South Industrial Park of Dongguan, Shangyu District, Shaoxing City,Zhejiang Province,China.

 

%E7%AC%AC%E4%B8%80%EF%BC%8C%E6%9C%80%EF%BC%8C%E4%BC%98%E7%A7%80%EF%BC%8C%E5%A2%9E%E5%BC%BA%EF%BC%8C%E4%B8%80%E6%B5%81

Sorry,当前栏目暂无内容!

您可以查看其他栏目或返回 首页

Sorry,The current column has no content!

You can view other columns or return Home

Get

A Quote

Leave us a message and get access to exclusive offers, product updates, and expert advice tailored just for you!

*is requiredl You can ask any questions in the company including products.Please ill in the correct contact infomation so that we can reply to youin time!

Submit
%{tishi_zhanwei}%